banner

SSD2608PC Yako CAN High Speed Bus Stepper Drive

The AC stepper drive is powered from AC24-80V / DC30-110V and is intended for use with step motors designed to handle a high bus voltage.
  • Brand:

    Yako
  • Item no.:

    SSD2608PC
  • Payment:

    100% T/T payment before delivery
  • Product origin:

    Made in China
  • Lead Time:

    Normally 7 workdays
  • Product Detail

SSD2608PC Yako CAN High Speed Bus Stepper Drive


The SSD2608PC is a versatility fully digital stepping Drive based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. The self-test and auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives on the markets. Its unique features make the SSD2608PC an ideal solution for applications that require low-speed smoothness.


Features:

  • Adopt new 32-bit motor control dedicated DSP chip
  • Voltage range: AC24-80V / DC30-110V, 16 microsteps setting
  • Intelligent current adjustment, reduce vibration, noise and heat
  • Low torque attenuation, speed up to 3000 rpm, excellent high speed performance and rigidity, perfect combination of servo and stepper advantages
  • Adopt CAN isolated bus, support standard CANOPEN protocol, up to 32 devices can be mounted
  • Built-in single-axis controller function, with speed, position, homing, multisegment position and other control functions
  • 5-channel optically isolated programmable input interface
  • 3-channel optically isolated programmable output interface

Application: 

can be widely used in engraving machines, special industrial sewing machines, wire stripping machines, marking machines, Autting machines, stage lighting, robots and medical equipment, laser equipment, marking machines, plotters and other automation equipment.


Dimensions


SSD2608PC Terminating Resistor Selection


SSD2608PC Communication Baud Rate Setting


SSD2608PC Motor Selection


SSD2608PC Communication Address Setting



Terminal Introduction

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Bus Stepper Drive
SSD2505PR Yako RS485 Bus Control Digital Stepper Drive
This integrated stepper  motor integrates bus communication control technology, simple wiring, no losing step, lower heat, high speed, high torque, low cost and convenient maintenance. It is a cost-effective motion control product.
Cnc Stepper Motor Drive
SSD2505PC Yako CAN High Speed Bus Stepper Drive
The AC stepper drive is powered from 24 to 50V and is intended for use with step motors designed to handle a high bus voltage of 340VDC.
Bus Stepper Drive
SSD2608PR Yako RS485 Bus Control Digital Stepper Drive
This integrated stepper  motor integrates bus communication control technology, simple wiring, no losing step, lower heat, high speed, high torque, low cost and convenient maintenance. It is a cost-effective motion control product.
Open-Loop Stepper Drive
YKE2305M 2 Phase Open-Loop Stepper Drive DC20~50V
YKE2305M open-loop stepper drive feature for 32-bit DSP control, low noise and superior vibration performance, with over voltage, under voltage etc. fault protection.
2-phase closed loop stepper drive
SSD2205M High performance Yako 2 Phase Close-Loop Stepper Drive
Stepper drive auto-setup measures motor parameters and configures motor current control and anti-resonance gain settings.
86mm AC220V Close-loop Stepper Motor
110mm 3 Phase DSP Close-loop Stepper Motor
110mm Series 3 Phase Close-loop Stepper Motor  Step accuracy: 5% Temperature: 80℃Max Ambient temperature: -20℃-+50℃ Insulation resistance: 100MΩ Min 500VDC Pressure resistance: 500VAC 1 minute Radial runout: Maximum 0.02mm (450g load) Axial runout: Maximum 0.08mm (450g load) Specification Model Step Angle (°) Motor Lenth (L) Holding Torque (N.m) Rated Current (A) Resistance (Ω) Inductance (mH) Rotor Inertia (g.cm²) Weight (kg) Motor Leads YK385EC127A1 1.2 156 12 4.2 1.2 13 9320 6.5 3 YK385EC156A1 1.2 238 20 4.2 1.88 18 12510 10.4 3 Suitable drive model: MS-L3 Dimensions Dimensions Model Shaft Diameter D (mm) Shaft Type (mm) Shaft Length L1 (mm)  YK3110EC140C1 19 Key 6*6*30 39 YK3110EC220C1 19 Key 6*6*30 39 Encoder Wiring Black GND Red +5V Blue/White EA- Blue EA+ Orange/White EB- Orange EB+ *Motor / Encoder cable: 0.3m Encoder standard cable: 2m (optional 8m/10m) No more motor cable needed Motor connection
MCC-32E  EtherCAT control card
MCC-32E EtherCAT control card
   MCC-32E is an EtherCAT control card that controls the motion of 32-axis motors with a bus refresh cycle of 1ms. It comes with 1 auxiliary encoder input, 8 digital inputs and 8 digital outputs (including 4 high speed PWM outputs). With CAN, RS485 bus, expandable 512/256/128 input\output\AD\DA, support Basic multi-tasking programming, 6 tasks, 10 files, so that program developers can easily write programs. And in linear, circular and spiral interpolation, space arc, support speed preview, electronic gear, electronic cam, motion superposition, virtual main axis, hardware latch, comparison output and other functions, it is comparable to the pulse type controller. In addition, it provides 4 high-speed color-coded inputs, 1us measurement accuracy, and supports continuous latching. This control card adapted to various types of robots (Delta, SCARA) multi-axis group, multi-manipulator coordinated motion.
motor closed-loop stepper drive
MS-S3 Promotional Yako 2 Phase Servo Stepper Drive
Model MS-S3 is the successful development of a new closed loop stepper motor driver based on more than 10 years of experience in stepper and servo R&D.
News letter
Join our mailing list, you will get new product release and event information as soon as possible later
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

skype

whatsapp