MCC1410C Four-axis Motion Control Card

MCC800P is a PCI-based motion control card for controlling stepper motors and servo systems. Motion planning through ARM and FPGA, pulse commands can be output, which can control 1-8 axes servo or stepper motor at the same time. The maximum frequency of each axis is 4MHz, and the 8-axis encoder input signal can be detected. It supports linear and circular interpolation, supports trapezoidal and S-shaped acceleration and deceleration point-to-point motion control, and supports speed/positoion change during motion. The position command can be output by single pulse (pulse + direction) or double pulse (CW + CCW pulse); it can be a differential output circuit or a single-ended output circuit.
MCC800P matched terminal board has multiple general I/Os, supports high-speed position latching and position comparison output. External bus I/O expansion greatly satisfies customers' various control requirements for I/O.

This product is equipped with a dynamic link library under Windows XP/Win7, which is convenient for customers to write their own application software. At the same time, it provides motion debugging software, which can demonstrate the function of this card, it also can be used to tests the operation of motion control cards, motors and drives and motion platforms.

Typical Application:

Widely used in PCB industry, semiconductor packaging industry, electronic processing industry, sheet metal processing industry, testing industry, such as: PCB drilling machine, PCB punching machine, solid crystal machine, ultrasonic wire bonding machine.

  MCC800S high performance motion control card, a PCI bus based motion controller for controlling stepper motors and servo systems. Motion planning through ARM and FPGA, can control 1-8 axes servo or stepper motor, support 2-8 axes linear interpolation, arbitrary 2-axis plane circular interpolation, arbitrary 3-axis space circular/coil interpolation. Each axis has a maximum pulse frequency of 4MHz and an encoder input signal. Interpolation motion has S-type speed curve, small circle speed limit, PWM vector speed follow, backlash compensation, system maximum acceleration limit and other functions.
    MCC800S matched terminal board has multi-channel general I/O, supporting high-speed position latching and position comparison output, continuous interpolation buffer I/O, external bus I/O expansion, greatly satisfying customers' various control requirements for I/O .

     This product is equipped with a dynamic link library under Windows XP/Win7, which is convenient for customers to write their own application software. At the same time, it provides motion debugging software, which can demonstrate the function of this card. it also can be used to tests the operation of motion control cards, motors, drives and motion platforms.    

Typical Application:           

Electronic manufacturing processing and testing equipment, engraving equipment, cutting equipment, placement machine, laser processing equipment, dispensing equipment, spraying, welding equipment, loading and unloading robots, etc.

2 Phase Open-Loop Stepper Drive YKD2608MC feature for 32-bit DSP control, low noise and superior vibration performance 16, excellent smoothness in low frequency microsteps.

Stepper drive auto-setup measures motor parameters and configures motor current control and anti-resonance gain settings. The high voltage drive uses ac input 90 to 240 Vac and output current is selectable from 0.6 to 2.5 A/phase (peak of sine).

The AC stepper drive is powered from AC24-80V / DC30-110V and is intended for use with step motors designed to handle a high bus voltage.

42mm Series 2 Phase Open-loop Stepper Motor  Step accuracy: 5% Temperature: 80℃Max Ambient temperature: -20℃-+50℃ Insulation resistance: 100MΩ Min 500VDC Pressure resistance: 500VAC 1 minute Radial runout: Maximum 0.02mm (450g load) Axial runout: Maximum 0.08mm (450g load) Specification Model Step Angle (°） Motor Lenth (L) Holding Torque (N.m) Rated Current (A) Resistance (Ω） Inductance (mH) Rotor Inertia (g.cm²） Weight (kg) Motor Leads YK42HB38-02A 1.8 40 0.4 2.0 1.06 2.0 54 0.3 4 YK42HB47-02A 1.8 40 0.48 2.0 1.35 2.9 77 0.32 4 YK42HB60-02A 1.8 40 0.72 2.0 1.8 3.7 110 0.5 4 Dimensions Dimensions Model Shaft Diameter D (mm) Shaft Type (mm) Shaft Length L1 (mm)  YK42HB38-02A 5.0 Key 0.5*15 24 YK42HB47-02A 5.0 Key 0.5*15 24 YK42HB60-02A 5.0 Key 0.5*15 24 Motor connection

YKD3506M adopts a servo-like control circuit, which can drive the motor at low speed with almost no vibration and noise.