Tel : 0755-86142288
Email : info@yankong.com
Item no.:
YKE2305MPayment:
100% T/T payment before deliveryProduct origin:
Made in ChinaProduct weight:
0.3kgLead Time:
Confirm the PO, normally 7 workdays.YKE2305M 2 Phase Open-Loop Stepper Drive DC18~36V
YKE2305M open-loop stepper drive feature for 32-bit DSP control, low noise and superior vibration performance, with over voltage, under voltage etc. fault protection.
Features:
Application:
Mainly used in laser cutting machine, laser welding machine, laser marking machine, lock screw
machine, medical equipment, robot, dispenser, electronic equipment and engraving machine
Dimensions:
YKE2305M Current Setting:
YKE2305M Microstep Setting:
Terminal Introduction:
Symbol |
Function |
Specification |
|||||||
PWR |
Power indicator |
When power on, the green indicator lights up. |
|||||||
ALARM |
Fault indicator |
When over current, under voltage or over voltage, the red indicator lights up |
|||||||
PU+ |
Pulse signal+ |
Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with PU- when >24V |
|||||||
PU- |
Pulse signal- |
Effects on falling edge, the motor moves a step when the pulse goes from high to low. It requires: low level 0~0.5V, high level 4~5V, pulse width>2.5us. |
|||||||
DR+ |
Direction signal+ |
Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting |
|||||||
DR- |
Direction signal- |
Used to change motor direction. Requirements: low level 0~0.5V, high level 5~24V, pulse width >2.5us |
|||||||
MF+ |
Motor free signal + |
Connect with the signal power supply, 5V~24V can drive, need to connect a current limiting resistor with MF- when >24V |
|
||||||
MF- |
Motor free signal -
|
When effective (low level), the motor coil current is turned off, the driver stops |
|||||||
-V |
Power supply- |
DC20-50V |
|||||||
+V |
Power supply + |
||||||||
+A,-A |
Motor connection |
|
|||||||
+B,-B |