YKE2405M-2A-IO Features: New-generation 32-bit DSP control technology, high cost performance A single driver controls two stepper motors of the same model simultaneously, achieving synchronized movement Triple optocoupler isolated digital signal input with one output, compatible with 5V/24V signals, supporting common cathode and common anode wiring methods Employing the latest resonance suppression algorithm, it delivers exceptional stability at medium and low speeds. The current control is smooth, precise, and results in minimal motor heating It features 8 current levels and 16 speed options The start-stop control supports two modes The operating current, speed, and acceleration/deceleration can all be set through the host computer debugging software The lock motor current can be set via the host computer, with the default being 50% of the set current It features overvoltage, undervoltage, overcurrent, and phase sequence protection functions Typical applications: Mainly used for speed control, loading and unloading machines, connecting stations, logistics transportation, transfer equipment, electronic devices, lithium battery equipment, etc. Brief Introduction: YKE2405M-2A-IO is a high-performance one to two stepper drive based on the new generation 32-bit DSP technology. The driving voltage is DC 20-50V, equipped with two motor inputs, which can simultaneously adapt to current continuous output within 4.0A (effective value). The flange is a 42/57mm two-phase open-loop stepper motor, and the drive can set the current and speed by dialing when adapting to different motors. The control mode of this drive is spontaneous pulse speed control, with 4 dials available for 16 speed segments, and can also be set to any speed range through the upper computer; Equipped with three optoelectronic isolated digital inputs and one alarm output; Internally, a servo like control principle, unique circuit design, and superior software algorithm processing are used to ensure smooth low-speed operation of the motor. Precise current control technology greatly reduces motor heating, making it highly effective in devices where users expect low heating, low noise, high stability, and high precision.

   MCC1410C is a PCI-based pulsed motion control card that can control up to four stepper motors or servo motors. Its core is composed of FPGA single chip. With plug and play, hardware linear interpolation, S-type speed control curve and other functions. The position command can be output in single pulse (pulse + direction) or double pulse (CW pulse + CCW pulse).      MCC1410C is an economical point motion control card with simple programming and multiple functions. It is widely used in semiconductor processing and testing equipment, electronic testing equipment, medical testing equipment, packaging equipment etc. Typical Application: High speed and high precision X-Y-Z motion platform control; PC platform machining center; Semiconductor processing and testing equipment, electronic testing equipment, medical testing equipment, packaging equipment.

MCC800P is a PCI-based motion control card for controlling stepper motors and servo systems. Motion planning through ARM and FPGA, pulse commands can be output, which can control 1-8 axes servo or stepper motor at the same time. The maximum frequency of each axis is 4MHz, and the 8-axis encoder input signal can be detected. It supports linear and circular interpolation, supports trapezoidal and S-shaped acceleration and deceleration point-to-point motion control, and supports speed/positoion change during motion. The position command can be output by single pulse (pulse + direction) or double pulse (CW + CCW pulse); it can be a differential output circuit or a single-ended output circuit. MCC800P matched terminal board has multiple general I/Os, supports high-speed position latching and position comparison output. External bus I/O expansion greatly satisfies customers' various control requirements for I/O. This product is equipped with a dynamic link library under Windows XP/Win7, which is convenient for customers to write their own application software. At the same time, it provides motion debugging software, which can demonstrate the function of this card, it also can be used to tests the operation of motion control cards, motors and drives and motion platforms. Typical Application: Widely used in PCB industry, semiconductor packaging industry, electronic processing industry, sheet metal processing industry, testing industry, such as: PCB drilling machine, PCB punching machine, solid crystal machine, ultrasonic wire bonding machine.