Tel : 0755-86142288
Email : info@yankong.com
Brand:
YakoItem no.:
YKD2608PEPayment:
100% T/T payment before deliveryProduct origin:
Made in ChinaLead Time:
Normally 7 workdaysYKD2608PE Yako Advanced DSP Technology Bus Type Stepper Drive
YKD2608PE is a high-performance bus-type stepping driver based on a new generation of 32-bit DSP technology. The voltage range is 24~80V. Choose to be powered by a single power supply. Suitable for NEMA34 motors. Strong anti-interference ability, almost no vibration and noise.
Features:
Application:
Mainly used in new energy industry, battery equipment, photovoltaic equipment, 3C non-standard automation equipment, electronic equipment, robots and medical equipment, laser equipment, textile equipment, plotters etc. automation equipment.
Dimensions:
Electrical Index:
Parameter |
YKD2608PE | |||
Min value | Typical value | Max value | Unit | |
Continuous output current |
0 |
- | 6.0 | A |
Input supply voltage |
24 | 36 | 80 | Vdc |
Logic input current |
10 | 10 | 50 | mA |
Logic input voltage |
5 | 24 | 24 | V |
Pulse frequency |
0 | - | 200 | kHz |
Insulation resistance |
100 | - | - | MΩ |
Status Indication:
Name |
Color |
Status |
Function |
PWR |
Green |
ON |
Indicator lights up when power on |
ALM |
Red |
Flashing once |
Overcurrent |
Flashing 2 times |
Overvoltage |
||
Flashing 3 times |
Undervoltage |
||
Flashing 4 times |
Wrong phase |
||
RUN |
Green |
OFF |
INIT state or power down state |
Blinking |
Pre-Operational state |
||
Single Flash |
Safe-Operational state |
||
Flickering |
BootStrap state |
||
ON |
Operational state |
||
ERR |
Red |
OFF |
No error or power down |
Blinking |
Extra error |
||
Single Flash |
Sync error |
||
Double Flash |
Watch-dog error |
||
L/A |
Green |
OFF |
Physical layer link is not established |
ON |
Physical layer link is established |
||
Flickering |
Physical layer links have data interaction |
Terminal Specification:
EtherCAT Features:
Parameter |
YKD2608PE |
|
EtherCAT communication indicators |
Link layer |
100BASE-TX Ethernet |
Communication port |
R J45 standard network port |
|
Network topology |
Line type, tree type, star type, etc. |
|
Baud rate |
100Mbps full duplex communication |
|
Sync manager |
SM0: Mailbox reception SM1: Email sending SM2: Process data output RPDO SM3: Process data input TPDO |
|
Communication mode |
SM sync mode DC sync mode, sync cycle 250us~4000us |
|
Application layer protocol |
COE:CANopen Over EtherCAT |
|
Cia402 working mode |
Cyclic Synchronous Position Mode; Cyclic Synchronous Velocity Mode; Profile Position Mode; Profile Velocity Mode; Homing Mode |